Stud Finder 3 In 1 Multifunction Wall Stud Sensor Detector With Lcd Display And

Stud Finder, 3 in 1 Multi-Function Wall Stud Sensor Detector with LCD Display and Sound Warning for AC Live Wire, Wood, Metal, Deep Scanning KULED M79 Stud Sensor Scanner Depth: Detects stud up to 0.71 inches (18mm) , metal up to 3 inches (76mm) , deep scanning up to 1.25 inches (32mm), presence of live wire up to 3 inches (76mm) . 3 in 1 : Multi-scanner stud finder for Wood, Metal, Deep, AC Current. Quickly locates edges and center of wood ,wall studs, metal pipes,wooden joist ,rebar behind walls, floors and ceilings, also indicates the presence of live AC wire . Easy to Read : LCD with digital display and continuous sound warning indicating you the location of the edges of the studs. Easy to Use : Only three buttons, first press ON/OFF button, then select the probe ,after that just press and hold the “Scan button”(at the left side of the device) and scan horizontally across the object surface. Auto power off without any operation after 60 seconds . Compact design is easy to hold and use. Low battery indication. Battery :1x9V battery（included）. KULED Stud Finder is a easy-to-use, also a necessary tool that quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings etc. This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the edge of the stud. Features: – STUD mode: detect metal and wood studs up to 0.71 inches (18mm) . – METAL mode: detect metal pipes ,rebars etc up to 3 inches (76mm) . – DEEP mode: detects wooden beams ,metal rebars up to 1.25 inches (32mm) . – AC mode: detects AC live wire up to 3 inches (76mm) . Select AC scan mode to determine position of hot wires. Begin by placing the scanner at some position away from hot wiring. – Auto power off after about 1 minutes of non-use. – Low battery indicator – Auto calibration all functions detection – Battery :1x9V battery（include） How to use 1: Press ON/OFF button to power on the device, and press RIGHT button to choose the scanning mode you want to detect. Listen “beep”to confirm the mode button effective. 2: Place the device flat on wall first. Then press and hold the button at the left side of the device , and keep the unit still until the unit sound a short beep twice and the display bars will be cleared . 3: While still holding on the button ,move the stud finder on the desired surface to scan and detect for studs, metal beams, rebars, pipes ,AC wire etc .you can scan the object from left to right. 4 : When the device detected an object , it will beep continually and a peck shape will also display on the LCD screen . Battery installation 1.Open battery door on back of case. 2.Connect a 9-volt battery to battery clip. 3.Insert battery into case and replace battery door. Package Contents 1 x Stud Finder 1 x 9V battery (included) 1 x User Manual SHIPPING Domestic Buyers – We have confidence in our products, but if you are not fully satisfied please contact us within 30 days of purchase and you will get full refund. – We ship within 3 business days of payment, usually sooner – We offer FREE shipping on all orders! – We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed International buyers – please note: Import duties, taxes, and charges aren’t included in the item price or postage cost. These charges are the buyer’s responsibility. – Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. * Order Cancellation Policy ** You can return a product for up to 30 days from the date you purchased it. 1. The seller reserves the right to cancel the special case only due to eBay cancellation fee. 2. The decision of seller is the final. 3. The seller will respond to the cancellation request within 2 business days. Please wait for the result of cancellation. 4. In case the cancellation is not completed by some reasons, the buyer can follow the options below to get the refund. 4.1 The buyer can reject the item when it arrives. 4.2 The buyer can send the item back to the seller within 30 days If the buyer receives item (USA Shipment ONLY). The seller will provide the FREE return label to the buyer when the buyer opens ” Return Item” case on eBay by using the reason as “Change my mind” ONLY. 5. When buyer has placed the order. The order will be processed and completed by automatic warehouse system within 5 minutes. In case that buyer sends the cancellation request after 5 minutes of placing the order, the request will be rejected.**Sending direct message to cancel the order is not allowed for every case.* Return Policy For the return case – If buyer would like to return the items for refund or replacement, please CONTACT SELLER to receive the free return label from seller. The refund or replacement will be processed with the tracking number of return label which is provided by seller only. The other ways of return which are not approved by seller will not be processed for the refund or replacement.